Skip to content
LocksmithRates Independent locksmith pricing & how-to

2014 Chevrolet Impala Key Fob Programming

Updated 2026 Programming, battery & replacement fob

You can program a 2014 Chevrolet Impala key fob yourself in a few minutes using a working key or remote, no dealer visit needed. Follow the steps below, then check the battery and the correct replacement fob (with FCC ID and part number) if you need a new one.

On this GM vehicle you can add a new key yourself using a key that already starts the engine. It adds keys without erasing the ones you have. The new key must be cut first.

Before you start

  • A key that already starts the engine
  • Your new key, already cut
  1. 1Insert the original, already-programmed key and start the engine.
  2. 2After it starts, turn the key off and remove it.
  3. 3Within 10 seconds, insert the new key and turn it to ON (don't start the engine).
  4. 4The security light goes out once the key is programmed (it can be too quick to see). No security light? Wait 10 minutes and 45 seconds.
  5. 5Repeat from step 1 for additional keys.

Replacement key fob options

Match the FCC ID printed on the back of your existing fob to be sure of the right part.

4-button Remote Head Key

Find on Amazon
FCC ID
OHT01060512, V2T01060512, V2T01060514, AVL-B01T1AC, AVL-B01T2AC
OE part #
13504200, 13504205, 13504258 23335583, 13579248, 23465183, 13501913, 13501513, 13576139, 13500222, 13574862, 13584826, 13576144, 13576176, 13500227, 5912543, 5912547, 5912555, 5913396

Transponder Key

Find on Amazon

4-button Remote

Find on Amazon
FCC ID
OUC60221, OUC60270
OE part #
22952177, 15859329, 15912859, 20833561, 20935330, 10337866, 5922032

4-button Proximity Key

Find on Amazon
FCC ID
OHT05918179, P4O9MK74946931
OE part #
13504283, 13500318, 13586120, STRATTEC: 5912558, 5921872, 5927057

Proximity Key

Find on Amazon
FCC ID
P4O9MK74946931, OHT05918179
OE part #
13504202, 13500224, 13500319, 13584829, 13585206, 13585209, 13586785, STRATTEC: 5912559, 5921873, 5927058

5-button Proximity Key

Find on Amazon
FCC ID
P4O9MK74946931, OHT05918179
OE part #
13504202, 13500224, 13500319, 13584829, 13585206, 13585209, 13586785, STRATTEC: 5912559, 5921873, 5927058

Proximity Key

Find on Amazon
FCC ID
AVL-B01T1AC, AVL-B01T2AC, OHT01060512, V2T01060512, V2T01060514
OE part #
N, A

2014 Chevrolet Impala key fob battery

Your 2014 Chevrolet Impala key fob uses a CR2032 3V lithium coin cell. A fresh one typically lasts 3–5 years.

Find CR2032 batteries on Amazon

How to replace the battery

  1. 1 Slide the release latch and pull the metal emergency key out of the fob.
  2. 2 Use that key (or a coin) to pry the two halves apart at the seam.
  3. 3 Lift out the old coin cell — note which side faces up.
  4. 4 Drop in the new battery the same way (printed + side usually faces the back cover).
  5. 5 Press the case back together until it clicks, then test lock/unlock and push-to-start.

Battery tips

  • Use a fresh, name-brand 3V lithium cell — bargain cells drain quickly.
  • Even with a dead fob battery you can usually still start the car by holding the fob against the start button — check your owner's manual.
  • If the fob still won't work after a new battery, it may need re-syncing or programming.

We may earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It never affects which product we recommend. Learn more.

Rather hire a pro?

See what it actually costs, broken out by dealer, locksmith, and DIY: