Infiniti Q60 Key Fob Programming

Updated 2026 2017–2018 2 model years

The Infiniti Q60 key fob has to be programmed by an automotive locksmith or dealer — there is no at-home procedure. Below is the exact replacement fob you need for each model year (FCC ID and part number), the battery it takes, and what programming costs.

Shop Infiniti Q60 key fobs on Amazon Match the FCC ID for your year (table below) before you buy.

Every Infiniti Q60 model year

Key fob programming method, fob type and battery for each Infiniti Q60 model year
Year	Programming	Key fob	Battery
2018	Locksmith or dealer	Proximity Key · 4/5-button	CR2032 battery on Amazon
2017	Locksmith or dealer	Proximity Key · 4/5-button	CR2032 battery on Amazon

2017–2018 Infiniti Q60

How to program your key fob

This key fob can't be programmed with a do-it-yourself procedure. The vehicle needs a diagnostic tool connected to its OBD port to pair a new fob, so a replacement has to be set up by an automotive locksmith or a dealer.

Order the correct replacement fob below — match the FCC ID on your current fob first — then have a local automotive locksmith or the dealer program it to your vehicle.

Replacement key fobs

Find your key type below, then match the FCC ID printed on the back of your existing fob — or, for a plain transponder key, the blank code — to be sure of the right part.

Proximity Key

2 versions

Stays in your pocket — the car unlocks and starts without inserting a key.

5-button Proximity Key

Find on Amazon

FCC ID: KR5S180144014
OE part #: 285E3-4HK0A, 285E3-4RA0A, 285E3-4RA0B
Frequency: 433 MHz
Chip: NXP AES 128 BIT

4-button Proximity Key

Find on Amazon

FCC ID: KR5S180144204
OE part #: 285E3-4HB0A, 285E3-4HB0C
Frequency: 433 MHz
Chip: NXP AES 128-BIT

Photos show the OEM part for each number listed. Aftermarket replacements sold online are often slightly different in appearance — the FCC ID, not the shape, is what determines whether a fob will work with your car.

Infiniti Q60 key fob battery

Your Infiniti Q60 key fob uses a CR2032 3V lithium coin cell. A fresh one typically lasts 3–5 years.

Buy Energizer CR2032 Lithium Coin Batteries (4-pack) on Amazon

How to replace the battery

1 Slide the release latch and pull the metal emergency key out of the fob.
2 Use that key (or a coin) to pry the two halves apart at the seam.
3 Lift out the old coin cell — note which side faces up.
4 Drop in the new battery the same way (printed + side usually faces the back cover).
5 Press the case back together until it clicks, then test lock/unlock and push-to-start.

Battery tips

Use a fresh, name-brand 3V lithium cell — bargain cells drain quickly.
Even with a dead fob battery you can usually still start the car by holding the fob against the start button — check your owner's manual.
If the fob still won't work after a new battery, it may need re-syncing or programming.

We may earn a commission on qualifying purchases made through links on this page, at no extra cost to you. It never affects which product we recommend. Learn more.

Rather hire a pro?

See what it actually costs, broken out by dealer, locksmith, and DIY:

Key fob programming cost Car key replacement cost